2017年2月17日星期五

MgO Board

MgO Board otherwise called “Magnesium Oxide Board”  is a factory-made product. It is a type of relatively new inorganic-bonded composite. Its main mineral being Magnesium Oxide (MgO). MgO Boards are produced with alkali–resistant fiberglass mesh as strengthening material. Magnesium oxide (melting point of 2,800°C) is often used as a basic refractory material for lining crucibles & furnaces.


Dimensions
Length (mm)
Width (mm)
Thickness Range (mm)
     2440
                          1220
   3mm – 25mm
MgO Board Properties
Density Kg/m3 Nominal
  950 to 1100 kg/M3
Tensile Strength Mpa Minimum
  5Mpa
Bending Strength Mpa Minimum
  9Mpa-16Mpa
Shrink Tolerance Ln mm
  ±0.5
Specific Absorption Ratio Maximum in %
  22%
Moisture Distortion Rate Maximum in %
  0.34%
Sustained Combustion Time in %
  0%
Length Tolerance in mm
  ±4
Shock Strength KJ/m2 Minimum
  5.5KJ/M2
Thermal Conductivity W/m K Maximum
  0.132W/mk
No Asbestos Content
Flatness in mm
  2mm
Temperature Shrinkage Rate in % Maximum
  0.1%
Fire Redundancy (Non-Combustible A Grade)
  A Grade
Minimum Bending strength Mpa
  10.5Mpa


Contact Information:

Susan Wei

Beijing Hocreboard Building Materials Co.,Ltd

Tel: 86 15001321220
Fax: 86 62151268
Skype: susan.wei1
WhatsApp:+8615001321220

2017年2月15日星期三

Magneisum Sulfate Board

Magnesium sulphate board is ideal for residential and commercial building construction. It is an environmentally friendly building material that can be used in place of traditional gypsum drywall as wall and ceiling covering material and sheathing.

Purpose and use:
Magnesium sulphate board is widely used primarily as wallboard alternative to conventional gypsum-based drywall and ply-woods. The magnesium sulphate boards can be scored and snapped, sawed, drilled, and fastened to wood or steel framing. It is recommended for interior applications only.
Applications:
-Interior wall and ceiling board
-Exterior wall and fencing board
-Exterior sheathing
-Trim materials
-Fascias
-Soffits
-Shaft-liner and area separation wall board
-Tile backing (backer board) and underlayment
-Substrates for coatings and insulated systems such as direct-applied finish systems, EIFS, SIPS, -Portland type stucco and synthetic stuccos.
Advantages:
-Ratings and testing: Fire-resistant
-Waterproof (freeze/thaw-tested for 36 months)
-Mold / fungus / bug free (non-nutritious to mold, fungus, insects ASTM G-21)
-Impact-resistant
-Silica/asbestos free
-Chloride free


Contact Information:

Susan Wei

Beijing Hocreboard Building Materials Co.,Ltd

Tel: 86 15001321220
Fax: 86 62151268
Skype: susan.wei1
WhatsApp:+8615001321220

Exterior Cladding Fiber Cement Board

Fibre cement boards and planks are flexible, very durable, water resistant, fire proof, resistant to insects and chemical corrosion. They are also easily installed using normal tools and are an excellent choice for residential and commercial buildings. Typical applications of fibre cement building materials include internal/external cladding required in wet areas where water resistance is required, as well as areas where weather (sun) and fire resistance is important.

Key advantages of Fibre Cement Cladding:
-Full colur and design finish
-Termite resistant
-Fire resistant
-Low susceptibility to cold weather or sun compared to some claddings
-Very durable
-Resistant to water damage
-Easy and fast installation
-Low maintenance
Contact information:
Susan Wei

Beijing Hocreboard Building Materials Co.,Ltd

Tel: 86 15001321220
Fax: 86 62151268
Skype: susan.wei1
WhatsApp:+8615001321220

2017年2月14日星期二

Fiber Cement Compressed sheets 1200x2400x15mm

Fiber Cement Compressed sheets are an extremely dense hard-wearing and long lasting floor substrate for use on decks, balconies and verandas and as internal flooring.
Its resistance to damage from moisture and rotting makes it a wise 
choice in bathrooms when installed and maintained correctly. It can also
 
be used on external decking, verandas, balconies, commercial floors and in laundries, kitchens and living areas.
The benefits of using the Fiber cement Compresses sheets
·         Extremely dense, hard-wearing and long lasting sub-floor

·         Provides a tough surface and is deemed non-combustible

Contact information:

Susan Wei

Beijing Hocreboard Building Materials Co.,Ltd

Tel: 86 15001321220
Fax: 86 62151268
Skype: susan.wei1
WhatsApp:+8615001321220


2017年2月13日星期一

Fibre cement board for pizza oven base – outdoor kitchen

Cement fibreboards size:

2440 x1220 x20mm
1650 x1220 x20mm
1350 x1220 x20mm
1090 x1220 x20mm
790 x1220 x20mm

CementFibre Board Characteristics:
·         The cement fibre board has excellent heat insulation properties; it is fire resistant with lower thermal conductivity for better heat insulation.
·         Water and moisture proof: an ideal material for interior partition walls of kitchens, washing rooms and so on and also for exterior walls.
·         Environmental friendly material Non-asbestos and no formaldehyde; No poison gas or radiation produced during using.
·         Can be used as wall or barrier to satisfy the requirement of sound insulation.
·         Easy to cut and installed.
·         A good ability to absorb shock and high strength.
·         Light weight and high strength, high density.
·         Bug resistant.
·         Long term performance.

CementFibre Board Applications:
·         Pizza ovens bases and outdoor kitchen benches
·         Outdoor and indoor kitchens
·         Bench tops and splash backs that can be tiled.
·         Flooring
·         And much more

Contact Information:

Susan Wei

Beijing Hocreboard Building Materials Co.,Ltd

Tel: 86 15001321220
Fax: 86 62151268
Skype: susan.wei1
WhatsApp:+8615001321220


2017年2月12日星期日

Drywall partition board

Specifications:
Standard length:1800-3660mm
Standard width :1200-1250mm
Thickness:     7-15mm
Type:  Plain paper gypsum board, Moistureproof paper gypsum board, Fire-resistance paper gypsum board, waterproof paper gypsum board
Application:
Suitable for most of the wall and ceiling applications where normal fire, structural and acoustic levels are specified. Suitable for direct decoration or plaster finish.

Specifications:
Edge:  Square edge or Tapered edge
Raw Materials :  Cement,Quartz Sand,Fiber
Basic Color: Gray
Density:  ≥1.20g/cm3
Thermal Conductivity:  ≤0.20W/MK
Water absorption rate :  ≤28% (GB/T7019-1997)   
Moisture Content:  ≤10%
Incombustibility:   A Class(GB8624-A)   
Bending Strength:   
Transverse    ≥11 N/m
㎡ ;Vertical    ≥8.5 N/m㎡
Radioactivity:   Conforming to GB6566-2001 A Class 
Asbestos:   100% asbestos free 

Specifications:
Size: 2440X1220, 2400x1200mm for wall & ceiling (Surface:  Plain color)
Size: 595x595mm, 603x603mm for ceiling (Surface: latex painted) 
Thickness: 5, 6mm, 9mm, 12mm, ...25mm
Edge:  Square edge or Tapered edge
Low Density: 0.8-1.1 g/cm3;            
High Density: 1.1-1.4 g/cm3
Basic Color:White-grey; Light yellow          
Packing: Wooden Pallet
Asbestos: 100% asbestos free                  
Moisture Content: ≤10%          
Thermal Conductivity: ≤0.25 W/MK           
Incombustibility: A Class(GB8624-A)
Radioactivity: GB6566-2001 A Class

Product Features:
1)100% asbestos free          2) Non-combustible, Class A;
3)Moisture resistant             4) Excellent impact resistant
5)Excellent sound insulation  6) Easy to work, fix and decorate
Specifications:
Thickness:      3mm--18mm                  Standard size:  1220mm*2440mm
Density:          0.85-1.27(g/cm3)           Bending strength:  18 Mpa
Breaking load: 113-498                        Thermal resistance: 1.14m2k/w
Sound Insulations: >44db                      Shrinking rate when heated: 1.0%
Rate of length change (wetting %): Below 0.26%  
Non flammability : Fire proof 1st grade

-Aluminium Composite Panel
Specifications:
Standard size: 1220 x 2440mm
Max. width:  1500mm ~1570mm
Max. length:  6,000mm, upon customers’ request
Panel thickness: 2mm, 3mm, 4mm (5mm or 6mm available upon requests)
Aluminium Skin:  0.15mm to 0.5mm
Surface:   PE Coating & PVDF Coating
Core:  fire-resistant polyethylene
Packing:   in bulk, or in wood pallet
Minimum Quantity:  500pcs

Contact Information:


Susan Wei

Beijing Hocreboard Building Materials Co.,Ltd

Tel: 86 15001321220
Fax: 86 62151268
Skype: susan.wei1

WhatsApp:+8615001321220


2017年2月10日星期五

A1 class incombustible fiber cement boards

FiberCement Board is stoutly made from a mixture of portland cement, fine silica, special cellulose fibers and selected fillers to impart durability, toughness and moisture resistance.
Fibercement board is then cured by an autoclaving process whereby the ingredients are reacted together under the effects of super-heated steam and high pressure. The synthetic cement silicate binder provides exceptional dimensional stability and an unrivalled resistance to movement due to effects of moisture or heat.


Raw Materials
Fiber Cement Board is stoutly made from portland cement, fine silica, cellulose fiber and pure water.

Specification
Size: 1200*2400MM, 1220*2440MM
Thickness: 3.5-30MM
Density: 1.1-1.70 g/cc
Color: Grey
Edges: Square, bevel, Taper

Technical Information

Bending Resistance: 17.5 N/SQ.M
Expansion after expose to the water for 24 Hr: 0.12%
Noise Resistance: B38
Modulus Flexibility: 4,500 Newton/SQ.M
Water absorption by Weight: 34%
PH Balance: pH7
Fire resistance: BS 476 incombustible A1 Class

Applications

– For External Wall & Ceiling
– For Internal Wall, Partition & Ceiling
– The Decorative applications
– The Sub-roof board
– The Underlay board for Floor and Wall tile

Contact Information:
Susan Wei

Beijing Hocreboard Building Materials Co.,Ltd

Tel: 86 15001321220
Fax: 86 62151268
Skype: susan.wei1
WhatsApp:+8615001321220