Fiber Cement Cladding Panel is one kind of
prefabricated interior cladding product that protect your internal building and
home. Over the past years, UV Coating fiber cement cladding panel had gained
more and more popularity and be deemed as one of the best investments for
building interior cladding, yet surprisingly few people know about it.
What is the advantage of Fiber CementCladding panels?
-Fireproof: Among many worries of
homeowners, fire problem is always at the top of the list. Fiber Cement
Cladding panel is made up of more than 90% inflammable materials. In was
reported, a fire damaged fire truck almost 100 feet(30m) away from the flames,
but the home constructed with fiber cement cladding panel was protected well.
-Insects and rotting resistant: Fiber
cement cladding panel had no seams or voids and prevents mold or mildew from
growing no matter inside wall or outside.
-Verities of color:Fiber Cement Cladding
panel can resemble natural stone, wood grain and also can provide plain and
solid feeling when you do interior cladding. Or if a color is not very
suitable, the siding can be re-painted.
-Longevity: You can expect the fiber cement
cladding panle on your home a lifetime and even longer. In terms of that, it can
increase the value of home especially when you plan to resale it. Fiber Cement
Cladding pnel is absolutely resistant to rot and inset,and can withstand the
punishing salt spray and wind if near the shoreline.
-Long keeping cost: Unlike a lot of other
popular siding materials, fiber cement cladding panle can resist mold and
mildew, and doesn’t need to be cleaned any more often than vinyl or wood.
What is the innovation of UV Coatinginterior cladding?
By adopting the UV curing technology, our UV
materials use 5% unsaturated fluorocarbon resin to coat on the surface of
autoclaved fiber cement cladding panel. In this way, it can reinforce the
durability to 40 years and fireproof performance.
-Hardness: 4H
-Fireproof: A class fireproof.
-Lifetime:40-year limited.
-Waterproof: No warping, crack and elaminating after boiling in 100 ℃ for 40
hours
-Tailor-made: Prefabricated in factory provide many regular size.
-Color varieties: can be resemble many natural stone such as marble,
granite and wood grain such as oak, maple and cedar tec.
-Eco-Friendly:
absolutely contain zero VOCs, 100% asbestos free and formaldehyde free
-Zero maintenance cost: Raining or water can refresh the UV coating
surface against oil and stain.
-Applicability:
UV coating fiber cement cladding panel is available in many benefits which
allow you to clad in living room, bedroom, hotel, hospital, museum, laboratory
and cinema where people always purse the feel of aesthetic impression and
comfort.
Composite
Items:
-
Coating：
Fluorocarbon resin
-
Substrate board: Reinforced
Fiber Curing Cement Board
-
Mortar: Best Mortar
Performance parameters
Physical performance
-Density: 1.4-1.6g/cm3
-Solvent resistance: Without leakage
after 100 times wiping test
-Adhesive force:actual measurement:0(while
standard: ≤1)
- Pencil hardness(scratch):4H
-Artificial Weathering aging: 3500
hours(national standard:2000hours)
-Fireproofing:A class
-Freezing resistance: without crack
and loosing after 25 time freeze-thaw test
Main performance
-Impact resistance(J)：≥10,apply to
the 1st floor, or ≥3 apply to 2nd floor.
-Freeze-thaw resistance: Without
crack, hollow, bubble and delaminating.
-Bending resistance load(N): no less
than dead-weight of the surface.
-Water absorption: (g/m2)≤500 after 10
hours
-Water tightness: Without leakage in
the inner side of protective layer
Dimensions of fiber cement cladding
panel
Panel length: 2440mm
Panel width: 1220mm
Thickness: 6mm, 8mm, 10mm and 12mm
没有评论:
发表评论