Tools:
No special toos are required. The products
can be used with normal nails, fastened by normal or self-driling screw and cut
by an electric power saw with a diamond blade
Fixing
Magnesium Oxide board can be fixed to both
timber(minimum size 1.5x3 inches) or steel frames(at least 0.55mm thickness).
The board must be supported at the edge at intermediate positions with centers
not exceeding 600mm. Screws must be located more than 12mm from edges and 50mm
from board corners
Fastener:
Fasterners can be both nails and screws. It
can be nailed directly to timber supports with round wire nails. For metal
screws, the size and length of the screw depends on the thickness of the board
and the gauge of framing pre-drilling the board is a must unless
self-embeding,self-drilling head scres such as Magnesium Oxide board(for
fixing8-12mm board to steel frame) and Magnesium oxide board(for fixing 15-20mm
board to steel frame ) are used.
没有评论:
发表评论