Pvc Coated Good looking Gypsum Ceiling Tiles/ Gypsum Plaster Ceiling

Gypsum Plaster Ceiling

   Description

PVC gypsum ceiling tile is made of high quality paper-faced gypsum board with a layer of PVC on surface and aluminum foil on its back. It is a kind of environmental friendly, light weight, high quality, fireproof, waterproof and corrosion-resistant decorative ceiling board.

   Application

It can be widely used in high fireproof and waterproof requirement environment, such as hotel, hospital, school, house and factory etc.

   Specification

Length(mm)	Width(mm)	Thickness(mm)	Edge
595	595   1195	7.0   8.0   9.0	Covered / Non-covered
600	600   1200
603	603   1206
605	605   1210
TRUSUS pvc gypsum ceiling tile is available to be produced the thickness from 7.0-12mm, the design according to customer requirements,Both Metric and Imperial systems are accept

   Technical Data

Materials	Gypsum Board
Surface	PVC and Aluminum Foil
Allow Dimension Difference	Length ≤±2.0mm
Weight Kg/m2	Width ≤±2.0mm
	Thickness ≤±0.5mm
	< 6.5kg/m2
Strength	Break Load>150N
Containing Water Rate	< 1%
Fireproof Class	Class B1  Meet the standard:GB8624-1997
Moisture Requirement	Under 90%

CE and ISO Approved 100% Asbestos Free China Fibre Cement Board

Fiber Cement Board Brief Introduction

The raw materials of fiber cement board are cellulose fiber, silicate cement, quartz sand, water and some additives. It's a kind of high-tech product which formed through accurate dosing by computer program, hatcheck craft and compressed by 14000tons hydraulic machine and autoclave under high temperature and pressure.

Product Application

(1). Interior and exterior wall; Furred ceiling

(2). Insulation materials, floor; Road barrier
(3). Sound-adsorbing wall & suspended ceiling

Main Features

It's 100% free of asbestos, formaldehyde, benzene and other harmful substances and with excellent performance like high strength, large size, light weight, fire and water proofing, green and environmental friendly, high efficient and energy-saving. Therefore, this kind of new material is vigorously developed and recommended by the country. 

Specification

(1). Thickness: 3.5-30mm

(2). Standard size: 1220*2440mm or 1200*2400mm, max length is 3000mm
(3). Note: other specification is available

Index	Moderate compressed
Density(g/cm3)	1.4-1.6
Water absorption (%)	28
Wet expansion (%)	0.17
Water penetration	No water drop on the board surface after 24hours
Modulus of Rupture--Air dried condition	14
Modulus of Rupture--Saturated condition	10
Frost resistant	No delamination and crack after 25cycles under freezing and thawing

Index	Moderate compressed
Density(g/cm3)	1.64
Water absorption (%)	17.8
Wet expansion (%)	0.15
Water penetration	Back side without water drop after 24 hours
Modulus of Rupture--Air dried condition	20.1
Modulus of Rupture--Saturated condition	15.0
Frost resistant	No layers and no cracks after 25 cycles under freezing and thawing

Index	Middle density
Incombustibility	Incombustible Class A1
Water penetration	Back side without water drop after 24 hrs
Modulus of Rupture--Air dried condition	15
Modulus of Rupture--Saturated condition	12

100% Non-asbestos Calcium Silicate Ceiling Board

Non asbestos Calcium Silicate Ceiling Board is mainly made of siliceous and calcareous materials as major and natural cellulose reinforced, forming in Hatschek process and high pressure (7000 tons and fumigation(in autoclave for 24 hours),Which has the advantages of highstrength, light weight, anti- freeze, water-resist, fire-proof, damp-proof, sound-absorption , no distortion and no radiation Used as suspended ceiling, partition, heat insulating board, base plate, external wall panel, exterior wall cladding, paneling, flooring, back-liners, skirting lines, prefabricated structures, door shutters

Specifications:

3000x1220x(3-30mm)   2440x1220x(3-30mm)

1. Fire resistant, ASTM E84. 2. Environmentally friendly. 3. Waterproof. 4. 100% non asbestos. 5. Light weight but durab

Product Data

Materials: Cement, Lime, Quartz sand, Paper plug

Size: 1200 x 2400/1220 x 2440mm

Thickness: 6mm, 9mm, 10mm, 12mm, 18mm, 20mm,30mm

Density: ≥ 1100 kg/m3

Moisture content:≤ 12%

P.H. Value: 8 – 9

Flexural strength: ≥ 148 Kgf/CM2

Impact strength: 6.3 Kj/M2 (8MM)

Adhesion bond strength: 7.0 Mpa (10MM)

Screws withdraw strength: 0.7 – 0.8 N

Fire resistance: British Standard 476, part4, 1970.

Length variation due to water absorption: 0.08%

Thermal conductivity at 50°C:≤ 0.21/W.mK

Water absorption:≤ 40%

Asbestos content: Not detected

Formaldehyde content: Not detected

Radioactivity: GB6566­2001 A Class

Sound insulation: 26 db (6MM)