Mgo board for interior Wall to Canada Market

SPECIFICATIONS:2,440mmX1,220mm 1,830mmX915mm 2,135mmX915mm 2,750mmX1,220mm 3,050mmX1,220mm Thickness:3mm-12mm

DES:Light Weight and High Intensity Easy to installation
MgO board density around 0.8-1.1g/cm3, easy to keep in stock and transportation.
Its intensity of impact resistance is 2-3 times to wall of gypsum board, it is easy to install, also could shorten time for a project effectively. 

MgO board can stick to, cut down, nailing, gluing, paint, saw, plane, easy to cut by knife, it is extremely convenienct to construct.

Test we can do before delivery:

Fireproof board test report Test standard: JC688_2006 < MGO board standard >
Specification	10mm	Produce date		2014.08.06		Test date	2014.09.01
Test item		Technical requirement				Test results	Results
Density (t/m 3 )						1.0	Qualified
Bending strength(MPa)		≥10				14	Qualified
Impact strength (KJ/M2)		≥2.5				6.5	Qualified
Moisture resistance		No moisture				No moisture	Qualified
Water content (%)		≤8				5.7	Qualified
Contraction rate when heated (%)		≤0.3				0.10	Qualified
Expansion when put into water (%)		≤0.6				0.13	Qualified
Water absorption (%)		≤28				10	Qualified
Crisp coefficient		≥0.7				1.3	Qualified
Warp when heated (‰)		≤3(Corporation standard )				0.12	Qualified
Put out of nails		E<6	6<e<10		E >10	25	Qualified
		≥25	≥20		≥15