Type : 960-7.5A
* Ordinary glazed tile
* Color adhesive tile
* Anti ageing adhesive tile or aluminum foil and
insulation tile
Length: below 6
meter
width:960mm
Actual using
width:920mm Thickness:5mm
Wave type: Midium
wave The
width of wave:130mm
The Height of
wave:40mm
The space between two waves:130mm
Weight/meter:11kg/m Available
colour:Red ,blue ,White,black ,etc.
The features of 960-7.5waves Mgo roof tile:
1.
Acid-alkali resistance,corrosion resistance: Proved by the experiment,
magnesite tile respectively in ph=1 sulfuric acid solution and 10% sodium hydroxide
solution soak for 72 hours,both no corrosive, even in a high degree of
acid-alkalienvironment,Magnesite tile is no any problem.
2.
Super anti bending force:
Certified
by the National Center for quality supervision and test of building engineering,
the transverse flexural force is 13600N, longitudinal anti fold force is 6242N
.This product can withstand the pressure of 150kg.
3.Noise
reduction:
Sound
absorption, noise reduction effect is excellent,For example ,which can
reduce the noise of the wind and rain.
4.The
advantages of Anti ageing adhesive film:
Surface
using PET anti - aging film. Delay the speed of aging of the material, improve
the durability of the material, greatly improve the service life of the tile.
5.Freeze-proof:
Up
to 50% Magnesium Oxide content in tile, its thermal conductivity is only 0.070,
so in the minus 40 degree in very cold conditions without any deformation.
6.Refractory
and High temperature resistance
Thermal
insulation effect of the product reached 10-12 degree (indoor and outdoor
temperature difference), the reason is the use of magnesium oxide, high calcium
powder and other inorganic raw materials. Magnesium oxide is a white amorphous
powder, tasteless, non-toxic, non-toxic, relative density of 3.85 (25 degree).
Melting point is 2852 degree, boiling point is 3600 degree, belongs to the
national level and non combustible materials, generally used in the
manufacture of refractory brick, refractory tube, steel furnace, non-ferrous
metal smelting and cement kilns, etc., are super refractory (national standard
2000 above).
7.Waterproof;
water-proof,
the product material is insoluble in water, the water absorption rate of less
than 9% .
8.Insulation
by using Aluminum foil film.
Using
high purity aluminum foil film, the surface is more smooth, more better
reflective performance. In the visible range, the reflectivity is 70%-80%, in
the infrared range, the reflectivity is 75%-100%, the heat insulation effect is
12-15%.
Contact information:
Beijing Hocreboard Building Materials Co.,Ltd
Tel: 86 15001321220
Fax: 86 62151268
Web: www.hocre-board.com
Email: info@hocre-board.com
Skype: susan.wei1
WhatsApp:+8615001321220
没有评论:
发表评论