High density fiber cement board and middle density fiber cement board

How to repair fiber cement roofing sheet

If you find that weather or accidents have damaged your fiber cement roofing, then you will need to perform some quick repairs before the next bout of rain. Fiber cement roofing is a complex material made up from a mixture of cement and fibrous material such as cardboard, cloth, or fiberglass. If you need to repair a wide area, then you might be better off calling in professional help, but if it is only a little bit of damage, then you will be able to manage this yourself. Fixing fiber cement roofing is not a difficult job, but it can be time consuming, so allow a full day to complete this task.

Step 1 - Clean the Roofing

The first step in any type of repair on your fiber cement roofing is to clean it thoroughly. This will ensure that you don't get any dirt or debris wrapped up with the paint and tar that you will be applying later. It is a good idea to scrub down the roof using a hand brush and some liquid soap, but you can use a pressure washer if your roof is still water-tight.

Step 2 - Inspect the Damage

Now all of the debris has been removed, inspect the roof for damage. Look at the broken tiles, and decide whether they need to be discarded or patched over. Small holes can easily be patched without the need to replace, but cracks and breaks will have to be replaced.

Step 3 - Add Patches

Cut out some fiberglass cement shingles to the right size, plus about an inch extra. Using some roofing tar, spread this over the surface of the tile to be mended, and then place the patch onto the hole. Press down around the edge to fix the patch into place, and then add more roofing tar over the top, plus a little caulk around the sides to ensure that there are no leaks.

Step 4 - Replace a Shingle

Take off the broken shingle by removing the nails, or lifting up the strip of roofing that it is connected to. Add either a separate tile, or a new strip by laying it down in the area you have just removed. You should be able to nail this back down, and then add some caulk or roofing tar around the nails to prevent water penetration.

Step 5 - Finishing Off

When the tiles have been fixed, it is a good idea to paint over the surface. This will disguise the fact that you have a new shingle or patch on your roof, and will also help to protect your fiber cement roofing from water penetration, particularly when the roofing tar has just been added. Use a paintbrush to add the paint, and then allow it to dry thoroughly.


More information please visit at www.hocre-board.com or send email to info@hocre-board.com

Fiber cement roof tile manufacturers

Product specifications:

Length: 900 to 3600

Width:920 or 1100

Thickness: 5,  5.5,  6,  6.5

Density:1.3-1.5g/cm3
Fiber Cement roofing tile is available in the standard colors of flamed red, blackish blue and green; however, it is also available to order in other colors, and the other side of the tile is white.
The construction area of the tile is 80%-85% of the whole tile area.
The product conforms to the standards for building materials, including Certifiable Technical Requirement for Industrial Type Material developed by National Research Center of Testing Techniques For Building Materials and, National Test Center of Polymer and Chemical Building Materials.

Transverse bending strength: 4900N/m

Water absorption: 22.8%

Water leak-proof property: no water leakage appears on the other side of the surface of the tile Frost resistance: no flakes on the surface of the tile after 25 times thaw-freeze test

CHARACTERISTICS:

In developing the Sanle products, a great number of aspects have had a vital effect on its design and appearance.

The new product would have to:

(1)Have a characteristic profile and size

(2)Include a full color range

(3)Be quick and simple to lay

(4)Be resistant to the rough climate

(5)Sell at a competitive price

(6)Workability

(7)Light weight with high strength performance

(8)Sound-tight

(9)Acid-resistant with stable chemical characters

(10)Heat isolation

Cement board

Cement board is a combination of cementand reinforcing fibers formed into 4 foot by 8 foot sheets (or 3 foot by 5 foot sheets),

1/4 to 1/2 inch thick that are typically used as a tilebacking board. Cement board can be nailed or screwed to wood or steel studs to

create a substrate for vertical tile and attached horizontally to plywood for tile floors,kitchen counters and backsplashes.

It can be used on the exterior of buildings as a base for exterior plaster systems and sometimes as the finish system itself.

Cement board adds impact resistance and strength to the wall surface as compared to water resistant gypsumboards.

Cement board is also fabricated in thin sheets with polymer modified cements to allow bending for curved surfaces.

Advantage

As a tile backing board, cement board has better long-term performance than paper-faced gypsum core products because it

will not mold, mildew or physically break down in the continued presence of moisture or leaks. Cement board is not actually

waterproof, but it is highly resistant to absorbing moisture and has excellent drying properties. In areas continually exposed to

water spray (i.e. showers) a waterproofing barrier is usually recommended behind the boards or as a trowel-applied product to the face of the boards behind the finish system.

Installation

Cement board is hung with corrosion resistant screws or ring-shank nail,Cement board has very little movement under thermal stress,

but the boards are usually installed with a slight gap at joints in shower pans, bathtubs, and each other. These joints are then filled with silicone sealantor the manufacturer's taping compounds before applying a finish. The filled joints are taped like conventional gypsum

board, but with fiberglass tapes that provide additional water resistance. Combined with a water impermeable finish, cement board is a

stable, durable backing board.

Fiber cement board

Fiber cement board consists of cement, sand, and cellulose fibers that are manufactured in layers to form sheets of varying thicknesses. The boards are manufactured using a process called autoclaving, which uses high-temperature steam curing to form the board and to increase the strength and stability of the sand and cement. The cellulose fibers help to prevent cracking.

Fiber cement boards are strong and designed to hold up under extreme climates where intense sunlight, moisture or wind is common. This material is also resistant to fire, insects and rotting. Fiber cement board doesn't require painting.

Fiber cement board doesn't warp or fade, which vinyl can do. It can withstand ultraviolet rays and is impenetrable by insects and birds. It doesn't dent or bump under direct impact and will not become brittle in cold temperatures. Fiber cement boards can be used in historical renovations, where other cladding materials are not allowed. Because of their long life, fiber cement boards also cut down on repair and maintenance costs. Many warranties guarantee the material for seven years or longer.

More information, please visit at www.hocre-board.com

Cellulose Fiber Cement board

Fibre cement board. A high performance cellulose fibre cement sheet manufactured with sand, cement, cellulose fibre and additives.

All of the above boards are also suitable for use in acoustic roofing applications, and Hocreboard  is also used extensively in acoustic floor applications.

Key Benefits Excellent weathering properties, high tensile strength, high MoE, smooth finish for paint, excellent acoustic performance. A very strong, versatile board.

Drywall board and Fiber cement board

Have you considered  cement board installation for your home? Help protect your walls from water damage with  cement board drywall.

Unlike standard drywall, which is prone to water penetration and damage,  cement board are designed to better endure some moisture exposure. While not waterproof,  cement board are moisture-resistant and often installed in areas of the home where occasional moisture is expected, such as bathrooms and basements.

Standard drywall is made of the mineral gypsum. Gypsum is mixed with water, starch and paper pulp to create sheetrock. The sheetrock is then surrounded by a paper covering. When water penetrates sheetrock, it causes the sheetrock to lose firmness and crumble, and may even lead to mold and mildew growth. The best way to repair water-damaged drywall is to replace it.

Cement board is a type of drywall composed of cement and a glass-fiber mesh covering. It is highly durable and more water-resistant than green board. Cement board is typically used in areas of the home expected to experience significant, direct water exposure.

Fiber cement board and Fiber cement roof tile

Modular homes is an emerging fast-growing segment in the home building industry. Modular homes are framed units which are erected in conformity with local building codes using precise and efficient construction technology. This technology uses fibre-cement sandwich panels for load-bearing wall and Anticorrosive Galvanized Iron (G.I.) joining strips (profiles) with fibre-cement boards for non-load bearing walls. The components with a few sawn hardwoods are integrated to make a hard
structure.

The Walls

The walls are made of fibre-cement sandwich panels, which are a permanent, rot proof, non-inflammable product, with a load-bearing capacity sufficient to carry the roof structure of this type of building.

The Roofs

The roof is made of corrugated fibre-cement sheets with ceiling on a wooden frame.

Modular Homes------Fiber cement roof tile and Fiber cement board

Modular homes is an emerging fast-growing segment in the home building industry. Modular homes are framed units which are erected in conformity with local building codes using precise and efficient construction technology. This technology uses fibre-cement sandwich panels for load-bearing wall and Anticorrosive Galvanized Iron (G.I.) joining strips (profiles) with fibre-cement boards for non-load bearing walls. The components with a few sawn hardwoods are integrated to make a hard
structure.

The Walls

The walls are made of fibre-cement sandwich panels, which are a permanent, rot proof, non-inflammable product, with a load-bearing capacity sufficient to carry the roof structure of this type of building.

The Roofs

The roof is made of corrugated fibre-cement sheets with ceiling on a wooden frame.

Non Asbestos fiber cement roof tile

STANDARD SPECIFICATION:
Length/mm: 1500-3000
Width/mm:920, 1100
Thickness/mm: 4.5, 5, 5.5, 6, 6.5
Height/mm:51
Number of waves:5.5
Distance of waves 177mm
Density g/cm3:1.3-1.5
CHARACTERISTICS:
Fiber cement roof sheet can be used in all building industry for roofing and side cladding.

Safty
Fiber cement roof sheets do not contain asbestos fiber,it confirms health and safety.
Color:all kinds of color for your consideration.
fiber cement roofing sheets are supplied in natural grey color.

It can be painted many differebt color painting,paint can be applied by brush, roller or spray gun.
Durability
Fiber cement roofing sheets have been evaluated for for durability by CE.
Adaptable
Fiber cement roofing sheet are excellent for roofing and side cladding for all tyoes of buildings.Eg private house,industrial,commercial and agricultural buildings,where economy and durability are environmental factors.
Fire Resistant
Fiber cement roofing sheets are noncombustible.
Wind Resustance
Fiber cement roofing sheets have considerable strength with enhanced dynamic load-bearing properties.
Content
Content,pva fiber,wood fiber,glass fiber,cement 42.5R

Optional Information
- Payment : T/T in Advance
- Origin : china
- Minimum Order : 1 fcl20
- Packaging : wooden pallet
- Samples : Free

More  information, please visit at www.hocre-board.com or email to info@hocre-board.com

Fiber Cement Roofing Manufacturers

Eternit is the biggest manufacturer in the world, and its products are very famous.

Fibre cement is a main component of long-lasting building materials. The main application areas are roofing and cladding. The list below gives some common applications.
Internal cladding:

Wet room applications – tile backer boards
Fire protection
Partition walls
Window sills
Ceilingsand floors
External cladding:
Flat sheets as base and/or architectural facing
Flat sheets for e.g. wind shields, wall copings, and soffits
Corrugatedsheets
Slates as architectural full and partial facing
Underroof
Planks
Roofing:
Slates
Corrugated sheets

Fibre-cement products have found a wide usage in various sectors of construction: industrial, agricultural, domestic and residential buildings, mainly in roofing and cladding applications, for new constructions and refurbishment projects.

Our products are mainly fiber cement cladding and fiber cement roofing. Eternit Price or Our price, you can compare it.  If you are interesting in our products, please send email to info@hocre-board.com.

Thank you very much!

Fiber cement roof tile

Economical

fiber cement roof tile can be regarded as one of the most economical product on the market

Fire Resistant

fiber cement roof tile are non-combustible. that means the product will not ignite in a case of fire and would also not contribute the spread of flames.

Adaptable

fiber cement roof tile are excellent for roof and side for all types of building. for example industrial and agricultural buildings, our product are economy and durability.

Color

fiber cement roof tile are natural grey color. and we can make many different colors for customer.

Fiber cement roofing materials

We knew that MaxiROOFING products are manufactured with the finest materials consisting of cement, sand, natural and synthetic fibers, pigment and additives, using state-of-the art technology.

“Hocreboard” Roofing products are manufactured with the cement, sand, natural and synthetic fibers and PP materials and the technology is from German . The density is from 1.3g/cm3-1.5g/cm3. It is more cheaper.

Choose MaxiRoofing or “Hocreboard” Roofing , Please make your choice.

Corrugated fiber cement roof tile

The corrugated fiber cement boards are used for both roofing and siding.These panels are completely weatherproof, have a high

level corrosion resistance, and come in different corrugations and colors. As far as sustainability, these panels are maintenance

free and have a life expectancy of at least 50 years.

Corrugated fiber cement roofing are manufactured from a selected blend of Portland cement and water, while being reinforced with

a mixture of both natural and synthetic fibers. Corrugated fiber cement boards offer the following benefits for roofing or siding:Highly

cost effective weatherproofing

· Virtually maintenance free

· No rust, rot or corrosion

· Resistant to chemical attack

· Vapour permeability reduces condensation

· Excellent noise and thermal insulation

· Quick and easy to install and fix

· Wide product and color range

Non-asbestos fiber cement board

Asbestos free fiber cement board.the size is 1220mm*2440mm the thickness is 3-30mm thickness.the size can be made according to your request.

Fibre Cement building boards and products are dimensionally stable, they also exhibit tremendous flexibilty without losing any of the inherent qualities for which the material is so highly acclaimed and accepted.

Fibre Cement products are manufactured for internal and external applications, wet area situations, acoustic, fire rated, structural and decorative purposes as well as flooring requirements.

This extremely versatile material is used throughout all forms of building construction including residential, commercial, industrial and institutional projects.

Magnesium oxide board manufacturer

Magnesium oxide board manufacturer

Magnesium oxide board as an internal wall lining product addresses the best interests of the consumers as it fills a void in the market place and offers a cost-effective yet superior product in all areas of wall board. It is the only product in the market place that is water proof, fire proof, sound insulating, termite proof, has both hygienic and high impact resistance qualities. Currently, it is impossible for the customers offered Magnesium oxide board to get such advantages from other products in the market..
Magnesium oxide board offers both peace-of-mind and a common sense approach to your selection of building materials.

Magnesium oxide board is a product that can be used wherever lining is required.
ALL the features listed below are the result of tests conducted primarily on the 7mm thick Magnesium oxide board sheets.

The performance of the 9mm or thicker Magnesium oxide board should be at least equal or better in many of these areas of testing.
Fire Resistant
Passive Fire Protection is achieved when your building is lined with Magnesium oxide board
throughout.
In a recent fire tests , wall systems incorporating both 7 & 9mm
Magnesium oxide board, achieved more than 240 minutes (4 hours) in integrity tests on steel
frames. To see photos of the tests please click here
For further details of Magnesium oxide board fire resistance performance, including tested
systems installation recommendations please go to the 'Performance' page.

Water Resistant
Magnesium oxide board samples demonstrated
negligible change in weight and modulus of rupture (MoL) after being fully
submerged in water.
In other tests, Magnesium oxide board showed no structural change or delamination after
several freeze/thaw cycles.

Mgo board building materials

Mgo board building materials is a technologically advanced building material that offers superior performance in every category when compared to traditional wood, gypsum and cement based products.

Magnum Board building products is virtually impervious to fire, water, insects; does not feed mold or mildew; is non-toxic, non- flammable and non-combustible; is durable, maintains it’s dimensional stability – even when wet; and, has exceptional bonding surface.

Mgo Board building products  is a mineral based green builder product. And it is homogeneous – no de-lamination.

Mgo Board building Products can have a positive impact on your Family’s health and safety while extending the life of your investment.

Mgo board building materials

Mgo board building materials is a technologically advanced building material that offers superior performance in every category when compared to traditional wood, gypsum and cement based products.

Magnum Board building products is virtually impervious to fire, water, insects; does not feed mold or mildew; is non-toxic, non- flammable and non-combustible; is durable, maintains it’s dimensional stability – even when wet; and, has exceptional bonding surface.

Mgo Board building products  is a mineral based green builder product. And it is homogeneous – no de-lamination.

Mgo Board building Products can have a positive impact on your Family’s health and safety while extending the life of your investment.

Non-asbestos fiber cement panels

Fiber cement panels is composed of Portland cement, recycled cellulose fiber from old cardboard cartons, and calcium carbonate.It is a decorative cement panel ideal for design applications ranging from decorative cladding for interiors & exteriors, rain-screens, retail fixtures and even countertops for kitchens and bathrooms.Fiber cement panels is sanded smooth on one side for a clean, uniform surface and supplied with square, factory edges.

The size is available in 4’ x 8’ sheets (4’ x 10’ special order) and thicknesses of 3mm-30mm.The boards are usually clear sealed to retain their natural stone appearance; however, they can be painted or stained with any product compatible with Portland cement surfaces to achieve your desired appearance.

Cuts with standard carpentry working tools.Surface face fastening either directly over the building's exterior plywood sheathing or a stand-off rain screen design.